Scripting Language

Below is the basic structure that every Script/Calculation transformation must follow:

Var
VariableName : VariableType;
VariableName : VariableType; 
... 
// Some single line Comment if necessary

Multi line comment example:

{ 
Multi line 
Comment
}

Procedure** ProcedureName; 
variables here if necessary
Begin
Some Code;
End;

Function FunctionName(variableList): VariableType;
variables here if necessary
Begin
Some Code if necessary;
Result := some expression
More Code if necessary; 
End;

… some more functions and procedures if necessary …

Begin 
the main program block.
Result:= some calculation
End.

Note: The functions and procedures can appear in any order. 
The only requirement is that if one procedure or function uses another one, 
that latter one must have been defined already. 

var                    // This starts a section of variables
LineTotal : Integer;   // This defines an Integer variable called LineTotal
First,Second : String; // This defines two variables to hold strings of text

Assigning Values to Variables

Variables are simply a name for a block of memory cells in main memory. If a value is assigned to a variable, that value must be of the same type as the variable, and will be stored in the memory address designated by the variable name. The assignment statement is the semicolon-equal :=.

• Variables must be declared at the beginning of the program, a procedure, or a function
• Variables must be initialized before they can be used.
• Variables can be reused as often as necessary. Their old value is simply overwritten by a new assignment.

Example:

Var
i : Integer:     { variable name is i, type is integer)
Begin
  i := 10;        { valid integer number assigned to variable i }
End.

Number variables can be assigned from other numeric variables, and expressions:

 
var
Age       : Byte;       // Smallest positive integer type
Books    : SmallInt;   // Bigger signed integer
Salary         : Currency;   // Decimal used to hold financial amounts
Expenses    : Currency;
TakeHome : Currency;
 
begin
Expenses      := 12345.67;  // Assign from a literal constant
TakeHome   := Salary;    // Assign from another variable
TakeHome   := TakeHome - Expenses;  // Assign from an expression
end;

Number calculations, or expressions, have a number of primitive operators available:

+ Add one number to another
- Subtract one number from another
* Multiply two numbers
/ Divide one decimal number by another
div Divide one integer number by another
mod Remainder from dividing one integer by another

When using these multiple operators in one expression, you should use round brackets to wrap around sub-expressions to ensure that the result is obtained. This is illustrated in the examples below:

 
var
myInt : Integer;  // Define integer and decimal variables
myDec : Single;
begin
myInt := 20;           // myInt is now 20
myInt := myInt + 10;   // myInt is now 30
myInt := myInt - 5;    // myInt is now 25
myInt := myInt * 4;    // myInt is now 100
myInt := 14 div 3;     // myInt is now 4   (14 / 3 = 4 remainder 2)
myInt := 14 mod 3;     // myInt is now 2   (14 / 3 = 4 remainder 2) 
myInt := 12 * 3 - 4;   // myInt is now 32  (* comes before -)
myInt := 12 * (3 - 4); // myInt is now -12 (brackets come before *)
myDec := 2.222 / 2.0;  // myDec is now 1.111
end;

var
Str1 : Char;        	// Holds a single character, small alphabet
Str2 : WideChar;    	// Holds a single character, International alphabet
Str3 : AnsiChar;    	// Holds a single character, small alphabet
Str4 : ShortString; 	// Holds a string of up to 255 Char's
Str5 : String;      	// Holds strings of Char's of any size desired
Str6 : AnsiString;  	// Holds strings of AnsiChar's any size desired
Str7 : WideString;  	// Holds strings of WideChar's of any size desired

Some simple text variable usage examples are given below:

+  	Concatenates two strings together
=  	Compares for string equality
<  	Is one string lower in sequence than another
<= 	Is one string lower or equal in sequence with another
>  	Is one string greater in sequence than another
>= 	Is one string greater or equal in sequence with another
<> 	Compares for string inequality

The Variant data type provides a flexible general purpose data type.

It can hold anything but structured data and pointers.

Variants are useful in very specific circumstances, where data types and their content are determined at run time rather than at compile time.

Example:

var
myVar : Variant;

TDateTime

Description

The TDateTime type holds a date and time value.

It is stored as a Double variable, with the date as the integral part, and time as fractional part. The date is stored as the number of days since 30 Dec 1899. Quite why it is not 31 Dec is not clear. 01 Jan 1900 has a days value of 2.

Because TDateTime is actually a double, you can perform calculations on it as if it were a number. This is useful for calculations such as the difference between two dates.

Note: No local time information is held with TDateTime - just the day and time values.

Example: Finding the difference between two dates

var
day1, day2 : TDateTime;
diff : Double;
begin
day1 := StrToDate('12/06/2002');
day2 := StrToDate('12/07/2002');
diff := day2 - day1;
Result:='day2 - day1 = '+FloatToStr(diff)+' days';
end;

day2 - day1 = 30 days

These are used in conjunction with programming logic. They are very simple:

Var
Log1 : Boolean;     // Can be 'True' or 'False'

Boolean variables are a form of enumerated type. This means that they can hold one of a fixed number of values, designated by name. Here, the values can be True or False.

Here is an example of how the if statement works:

var
 number : Integer;
 text   : String;
begin
 number := Sqr(17);          // Calculate the square of 17
 if number > 400            
 then text := '17 squared > 400'    // Action when if condition is true
 else text := '17 squared <= 400';  // Action when if condition is false
 result:=text;
end;

text is set to : '17 squared <= 400'

There are a number of things to note about the if statement. First that it spans a few lines - remember that statements can span lines - this is why it insists on a terminating ; Second, that the then statement does not have a terminating ; -this is because it is part of the if statement, which is finished at the end of the else clause.

Third, that we have set the value of a text string when the If condition is successful - the Then clause - and when unsuccessful - the Else clause. We could have just done a then assignment:

if number > 400                   
then text := '17 squared > 400';

Note that here, the then condition is not executed (because 17 squared is not > 400), but there is no else clause. This means that the if statement simply finishes without doing anything.

Note also that the then clause now has a terminating ; to signify the end of the if statement.

We can have multiple conditions for the if condition. And we can have more than one statement for the then and else clauses. Here are some examples:

If (condition1) And (condition2)   // Both conditions must be satisfied
 then
   begin
     statement1;
     statement2;
     ...
   end              // Notice no terminating ';' - still part of 'if'
 else
   begin
     statement3;
     statement4;
     ...
   end;

We used And to join the if conditions together - both must be satisfied for the then clause to execute. Otherwise, the else clause will execute. We could have used a number of different logical primitives, of which And is one, covered under logical primitives below.

There is nothing to stop you using if statements as the statement of an if statement. Nesting can be useful, and is often used like this:

if condition1
 then statement1
 else if condition2
      then statement2
      else statement3;

However, too many nested if statements can make the code confusing. The Case statement, discussed below, can be used to overcome a lot of these problems.

Before we introduce these, it is appropriate to introduce the Boolean data type. It is an enumerated type that can have one of only two values: True or False. We will use it in place of a condition in the if clauses below to clarify how they work:

begin
 if false And false
 then Result:='false and false = true';
 
 if true And false
 then Result:= 'true  and false = true';
 
 if false And true
 then Result:= 'false and true  = true';
 
 if true And true
 then Result:= 'true  and true  = true';

 if false Or false
 then Result:= 'false or  false = true';
 
 if true Or false
 then Result:= 'true  or  false = true';
 
 if false Or true
 then Result:= 'false or  true  = true';

 if true Or true
 then Result:= 'true  or  true  = true';

 if false Xor false
 then Result:= 'false xor false = true';

 if true Xor false
 then Result:= 'true  xor false = true';

 if false Xor true
 then Result:= 'false xor true  = true';

 if true Xor true
 then Result:= 'true  xor true  = true';

 if Not false
 then Result:= 'not false  = true';

 if Not true
 then Result:= 'not true  = true';
end;

true and true = true false or true = true true or false = true true or true = true false xor true = true true xor false = true not false = true

Note that the Xor primitive returns true when one, but not both of the conditions are true.

The If statement is useful when you have a simple two way decision. Ether you go one way or another way. Case statements are used when you have a set of 3 or more alternatives.

A simple numerical case statement:

var
 i : Integer;
begin
 i := [F1];
 Case i of
   15 : Result := ‘Number was fifteen';
   16 : Result := 'Number was sixteen';
   17 : Result := 'Number was seventeen';
   18 : Result := 'Number was eighteen';
   19 : Result := 'Number was nineteen';
   20 : Result := 'Nuumber was twenty';
 end;
end;

Number was fifteen

The case statement above routes the processing to just one of the statements. OK, the code is a bit silly, but it is used to illustrate the point.

Supposing we were not entirely sure what value our case statement was processing? Or we wanted to cover a known set of values in one fell swoop? The Else clause allows us to do that:

var
 i : Integer;
begin
 i := [F1];
 Case i of
   15 : Result := ‘Number was fifteen';
   16 : Result := 'Number was sixteen';
   17 : Result := 'Number was seventeen';
   18 : Result := 'Number was eighteen';
   19 : Result := 'Number was nineteen';
   20 : Result := 'Nuumber was twenty';
 else
   Result := 'Unexpected number‘;
 end;
end;

Unexpected number : 10

Why loops are used in programming

One of the main reasons for using computers is to save the tedium of many repetitive tasks. One of the main uses of loops in programs is to carrry out such repetitive tasks. A loop will execute one or more lines of code (statements) as many times as you want.

Your choice of loop type depends on how you want to control and terminate the looping.

This is the most common loop type. For loops are executed a fixed number of times, determined by a count. They terminate when the count is exhausted. The count (loop) is held in a variable that can be used in the loop. The count can proceed upwards or downwards, but always does so by a value of 1 unit. This count variable can be a number or even an enumeration.

Here is a simple example counting up using numeric values:

var
 count : Integer;
begin
 For count := 1 to 5 do
  Result:= 'Count is now '+IntToStr(count);
end;

Here is a simple example counting up using numeric values:

var
 count : Integer;
begin
 For count := 5 downto 1 do
  Result:= 'Count is now '+IntToStr(count);
end;

The For statements in the examples above have all executed one statement. If you want to execute more than one, you must enclose these in a Begin and End pair.

The Repeat loop type is used for loops where we do not know in advance how many times we will execute. For example, when we keep asking a user for a value until one is provided, or the user aborts. Here, we are more concerned with the loop termination condition.

Repeat loops always execute at least once. At the end, the Until condition is checked, and the loop aborts of condition works out as true.

A simple example

var

 stop : Boolean;          // Our exit condition flag
 i : Integer;
begin
 i := 1;
 exit := False;           // do not exit until we are ready
 repeat
   i := i+1;                // Increment a count
   if Sqr(i) > 99
   then stop:= true;     // Exit if the square of our number exceeds 99
 until stop;              // Shorthand for 'until exit := true'
result:=I; 
end;

Upon exit, i will be 10 (since Sqr(10) > 99)

Here we exit the repeat loop when a Boolean variable is true. Notice that we use a shorthand - just specifying the variable as the condition is sufficient since the variable value is either true or false.

Using a compound condition

var

 i : Integer;
begin
 i := 1;
 repeat
     i := i+1;          // Increment a count
 until (Sqr(i) > 99) or (Sqrt(i) > 2.5);
result:=i; 
end;

Upon exit, i will be 7 (since Sqrt(7) > 2.5)

Notice that compound statements require separating brackets. Notice also that Repeat statements can accommodate multiple statements without the need for a begin/end pair. The repeat and until clauses form a natural pairing.

While loops are very similar to Repeat loops except that they have the exit condition at the start. This means that we use them when we wish to avoid loop execution altogether if the condition for exit is satisfied at the start.

Var
 i : Integer;
begin
 i := 1;
 while (Sqr(i) <= 99) and (Sqrt(i) <= 2.5) do
     i := i+1;                // Increment a count
 result:=i; 
end;

Upon exit, i will be 7 (since Sqrt(7) > 2.5)

Notice that our original Repeat Until condition used Or as the compound condition joiner - we continued until either condition was met. With our While condition, we use And as the joiner - we continue whilst neither condition is met. Have a closer look to see why we do this. The difference is that we repeat an action until something or something else happens. Whereas we keep doing an action while neither something nor something else have happened.

Functions provide a flexible method to apply one formula many times to possibly different values. They are comparable to procedures but

• functions are of always of a certain type
• functions usually have one or more input variable(s)
• the function name must appear at least once inside the definition

The general form of the function statement looks like this:

Function FunctionName(VariableName: VariableType): VariableType;
Begin
  some code, if necessary;
  Result := some computation;
  more code if necessary;
End;

Begin
Result:= [F001] + [F002]; 
End;

Begin
Result:= StrToFloat([F001]) + StrToFloat([F002]); 
End;

Begin
If  [F002]='' then
  Result:= 0
else If  [F002]=0 then
  Result:= 0
Else 
  Result:= StrToFloat([F001]) mod StrToFloat([F002]); 
End;

Var MyVariable : integer;
Begin
MyVariable:=10;
Result :=StrToFloat([F001]) mod MyVariable;
end;

There are two calculation functions which can be used to pass data from one object into another:

1. SetVariable
2. GetVariable

Example:

begin
SetVariable('VariableName',[F0001]);
end;

begin
Result:= GetVariable('VariableName'); 
end;

Var I : Integer;
  s: string;
begin
I:=1;
S:=GetVariable('I'); 
if s='' then  
  SetVariable('I',I)
else  
 begin
  I:=GetVariable('I');   
  I:=I+1;  
  SetVariable('I',I);    
 end;
Result:=I;
end;

• Supported Functions List
• Best practice for Calculations